BMW Scrambler Engine Information - BMW Scrambler Forum
 
Thread Tools
post #1 of 9 Old 07-15-2015, 05:43 PM Thread Starter
Senior Member
 
Join Date: Jun 2015
Posts: 127
BMW Scrambler Engine Information

Scrambler will be using the same 1200cc airhead from the RnineT


Type: Air/oil-cooled flat twin ('Boxer') 4-stroke engine, two camshafts and four radially aligned valves per cylinder, central balancer shaft
Bore x stroke: 101 mm x 73 mm
Capacity: 1,170 ccm
Rated output: 110 hp (81 kW) at 7,550 rpm
Max. torque: 88 lb-ft (119 Nm) at 6,000 rpm
Compression ratio: 12.0 : 1
Mixture control / engine management: Electronic intake pipe injection
Emission control: Closed-loop 3-way catalytic converter, emission standard EU-3


Maximum speed: over 125 mph
Fuel consumption per 100 km at constant 90 km/h: 52 mpg at a constant 56 mph (4.5 l)
Fuel type: Premium Unleaded
LesBres is offline  
post #2 of 9 Old 07-16-2015, 03:26 PM Thread Starter
Senior Member
 
Join Date: Jun 2015
Posts: 127
Also if you're interested in learning more about the airhead Motorrad has a page up on their website that deep dives into the technology and engineering. http://www.bmw-motorrad.com/com/en/i..._overview.html
LesBres is offline  
post #3 of 9 Old 07-18-2015, 12:16 PM
Senior Member
 
Join Date: Jun 2015
Posts: 327
From looking through the information they provided, while comprehensive, a dyno chart showing its power band would have been great to see as we're always curious what low end performance could be like.



ΩpenRoad is offline  
 
post #4 of 9 Old 07-20-2015, 05:07 PM Thread Starter
Senior Member
 
Join Date: Jun 2015
Posts: 127
Quote:
Originally Posted by ΩpenRoad View Post
From looking through the information they provided, while comprehensive, a dyno chart showing its power band would have been great to see as we're always curious what low end performance could be like.
NineT dynoed with different parameters

LesBres is offline  
post #5 of 9 Old 07-30-2015, 05:40 PM
Senior Member
 
Join Date: Jun 2015
Posts: 327
Well then... I know where my dollars will be going, into the REMUS Complete. Difference in the low end while significant in comparison to the other 2 definitely won't noticeable from one to the other.



ΩpenRoad is offline  
post #6 of 9 Old 08-01-2015, 11:37 AM Thread Starter
Senior Member
 
Join Date: Jun 2015
Posts: 127
Quote:
Originally Posted by ΩpenRoad View Post
Well then... I know where my dollars will be going, into the REMUS Complete. Difference in the low end while significant in comparison to the other 2 definitely won't noticeable from one to the other.
its not as massive as you make it sound. It has a slight advantage between 6500 and 7500...
LesBres is offline  
post #7 of 9 Old 02-11-2016, 09:16 AM
Junior Member
 
Join Date: Feb 2016
Posts: 7
Thanks guys, found a lot of useful information!
hunt is offline  
post #8 of 9 Old 02-11-2016, 11:09 AM
Senior Member
 
Join Date: Jun 2015
Posts: 327
Quote:
Originally Posted by hunt View Post
Thanks guys, found a lot of useful information!
Yeah if you have any questions let us know. Information is sort of limited at the moment, this forum is just about the best resource out there.



ΩpenRoad is offline  
post #9 of 9 Old 02-21-2019, 09:04 AM
Junior Member
 
Join Date: Feb 2019
Posts: 5
It is very talented. I wish you the best of success.
TomBoodkir is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome